"Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A. Cubic Inch Size: .517 Flow at 1800 RPM: 4.0 Flow at 3600 RPM: 8.0 Maximum PSI Cont.: 2500 Maximum PSI Intmt.:2750 O-Ring Port Size, SAE: 7/8in.-14"

Price : $ 111.99

Prices are subject to change. Please click details below for the current price.

We also recommend

Protects pump with bypass at 300 PSI instead of 3000-plus PSI. Permits a maximum volume of 3 to 4.2 GPM. 100 to 3000 PSI maximum discharge pressure. Soft start design allows pressure to build slowly instead of creating a big pressure spike when you pull the trigger. 165? maximum water temperature. Inlet and bypass ports are 3/8in. NPTF. Outlet port is 3/8in. NPTM. All stainless and brass internal parts. No external moving parts or springs.

Price : $ 74.99

Prices are subject to change. Please click details below for the current price.

R & Ds ultrasonic cleaning system is designed for demanding applications. Ultrasonic cleaning is especially effective on intricate parts and small passageways. The sweep-frequency generator increases the effectiveness of ultrasonic agitation and

Price : $ 9599.99

Prices are subject to change. Please click details below for the current price.

"Little Giant® pump moves 170 GPH at a height of 1ft, 100 GPH at 5ft Saves you parts-washing time! Use it to build a parts washer or replace the pump on your old parts washer. Use it for a fountain, waterfall or fish tank! Submersible use only. 1/4in. male NPT outlet. Hose not included. Only 4in.H x 3 1/4in.L x 2 3/4in.W. Impedence-protected, single phase motor uses 115 Volts; draws just .6 Amp. 6-ft. SJT 18-3 pigtail cord without plug. UL listed for water applications. One year limited warranty. U.S.A."

Price : $ 59.99

Prices are subject to change. Please click details below for the current price.

"3:1 ratio stubby style stationary air pump used for non-corrosive liquids and oils including gear lube and ATF. For use on tanks or drums with 2in. opening. Maximum 145 PSI and 100 working PSI. Delivers 5 GPM. 1/4in. NPT air inlet, 3/4in. NPT outlet and 3/4in. bottom inlet. Self-lubricating air pump also comes with connecting hoses."

Price : $ 399.99

Prices are subject to change. Please click details below for the current price.

"Pneumatic 50:1 chassis lube system pumps grease from a 120–lb. drum and has a free–flow rate of 52 oz. per minute. Recommended for grease up to NLGI #2. Complete system includes control handle, Z–swivel, male and female quick couplers, needle valve, air filter, drum cover, follower plate, 12ft.L x 1/4in. high–pressure hose and drum dolly on 4 casters. Max. 10,000 PSI. Pump tube measures 29.13in.L x 1.18in. dia. Pump head is 10?in.L x 2?in. dia. Suction tube constructed with no seals to eliminate excessive wear. 5–year limited warranty."

Price : $ 399.99

Prices are subject to change. Please click details below for the current price.

Dependable Mitsubishi GM-132 engine powers this durable water pump. High-pressure system operates at 80 PSI. 2in. suction and discharge ports. Carbon ceramic mechanical seal resists wear and heat. Standard cast iron impeller and volute last long in fresh water applications. 2-year limited warranty. 4 HP Mitsubishi GM-132 engine2in. suction and discharge ports7920 GPH max. flow164-ft. max. total head26-ft. max. suction lift1/8in. max. solid size2-year limited warranty.

Price : $ 499.99

Prices are subject to change. Please click details below for the current price.